3M Scotchcast Flexible Power Cable Splicing Kits 82-F1 82-F2 82-BF电力绝缘防水中间接头Scotchcast树脂修补材料
这是用来修补电缆破损或拖动式中间头密封,柔软性较好,***性强。
特征:
具有较好的阻燃性
当用在82-F1和82-F2中间头产品,有MSHA批准序列号P-142-5。
Item # | Splicing Type 接头 | Sealing Compound绝缘防水胶 | Cable OD Range电缆外径 mm (inch) | Conduction Size Range导体尺寸(AWG) |
82-F1 | inline 直线型 | 2130B 7.6 oz | 6 - 20 (0.25 - 0.80) | 6-1/0 |
82-F2 | inline直线型 | 2130C 21.7oz | 20 - 30 (0.80 - 1.20) | 2/0—4/0 |
82-BF | tap 分歧Y型 | 2130B 7.6 oz | 6 - 20 (0.25 - 0.80) | up to 1/0 |
3M Scotchcast 82-F and 82-BF Series Flexible Power Cable Splicing Kits are a series of flexible inline and tap splices for use on non-shielded portable power cables and cords. They are designed to be used on single and multiple conductor cables and cords rated up to 1000 Volts (600/2000 Volts mine portable cable rating). The 82-F Series will accommodate a single-conductor cable rated up to 5 kV. The splices will accommodate single-conductor cables sized up to 4/0 for inline splicing and up to 1/0 for tap splicing. Multi-conductor sizing is based on a cable diameter range of up to 1.2 inches for inline splicing and up to 0.8 inches for tap splicing.The splice kits are based on Scotchcast 2130 Compound for toughness, flexibility, moisture sealing and flame retardancy. They are permanent splices as assigned by the Mine Safety and Health Administration (P-l42-5 MSHA). The completed splices are designed for use in weather exposed, direct burial or submerged locations.Kit Contents:
Each kit contains sufficient quantities of the following materials to make one splice or cable repair (connectors are not included in kit):
- One-piece removable mold
- Scotchcast 2130 Compound in "Unipak" container
- Scotch 23 Tape, for sealing mold ends
- Abrasive cloth (80J grit)
- Comprehensive instructions showing proper installation techniques for splicing non-shielded portable power
cables and cords.Applications:To join or re-jacket non-Armoured portable power cable and portable cordsFor inline single-conductor cables rated up to 5kVFor branch single-conductor cables rated up to 1000VFor inline and branch multi-conductor cables rated up to 1000VFor mine portable cable rated 600/2000V (P-145-5 MSHA)For use with compression inline connectors (82-F) and compression “C” branch connectors (82-BF)For jacket repairsFor indoor and outdoor applications: Weather exposed /Direct burial /Submerged / Cable reelsEach kit contains sufficient quantities to make one splice or cable repair (connectors are available separately)82BF-1可挠性电力电缆岐路接头 (Flexible Power Cable Tap Splicing)
82-F1及82-F2用于无遮蔽、可挠性电力电缆之直路接续
其***电压等级为5KV(单蕊电缆)或1000V(多蕊电缆)
此接头系以绝缘胶做绝缘、防水及耐磨之主要部份每一接头包含下列组件:
1组 单体式可剥离式外膜(one-piece removable mold)
1卷 防水胶带(sealing tape)
1条 砂布(abrasive cloth)
1袋 绝缘胶(2130 compound)
此组件不包含压接套管(connector)3M™ Scotchcast™ Flexible Power Cable Splice Kit 82-F1, Cable Insulation O.D. 0.25-0.80 in (6,4–20,3 mm), 10 per case3M™ Scotchcast™ Inline Splice Kits for Flexible Power Cable 82-F1 and 82-F2 are for use on unshielded, portable power cables. The kits are rated up to 5 kV for single conductor and up to 1 kV for multiple conductors. Not for retail sale or use in Maryland or Oregon.The kits are designed to be used with inline compression connectors. The 82-F series kits are permanent splices as assigned by the Mine Safety and Health Administration (P-142-5 MSHA). Connectors are not included, order separately. 3M™ Scotchcast™ Flexible Splice Kit 82-F2, Non-shielded, 1-5 kV, Non-Shielded Dry and Wet Cables, Single and Multiple Conductor Portable Cable, 10 boxes/carton3M™ Scotchcast™ Inline Splice Kits for Flexible Power Cable 82-F1 and 82-F2 are for use on unshielded, portable power cables. The kits are rated up to 5 kV for single conductor and up to 1 kV for multiple conductors. Not for retail sale or use in Maryland or Oregon. Number of Conductors:
· 1 for 5 kV
· Multiple for 1 kVSpecifications
China RoHS - Below MCV | No |
Conductor Sizes for 5 kV | 1 AWG, 1/0 AWG, 2 AWG, 4 AWG, 6 AWG |
EU RoHS Compliant | No |
Insulation O.D. Range | 0.25 - 0.80 Inch |
Product Series | 82-F Series |
Product Technology | Resin |
Product Type | Splice |
Shielding Type | Multiple Conductor Portable Cable, Non-Shielded, Single Conductor Portable Cable |
Splice Type | Inline |
Voltage | 1 kV, 5 kV |
3M™ Flexible Splice 82-BF1, Non-Shielded Portable Power Cables and Cords, 1 kV, 10 per caseThis is for use on unshielded portable power cables and cords. 82-BF1 can be used on single conductor or multiple conductor cables using a compression "C" tap connector. Not for retail sale or use in Maryland or Oregon.
Cable Type | Non-Shielded Portable Power Cables/Cords |
China RoHS - Below MCV | No |
Conductor Sizes | 1/0 AWG |
EU RoHS Compliant | No |
Insulation O.D. Range | 0.25 - 0.80 Inch |
Product Type | Resin Splice |
Splice Type | Resin |
Voltage | 1 kV |
Number of Conductors:
· 1 for 5 kV
· Multiple for 1 kVSpecifications
3M Scotchcast™ 柔韧的电力电缆连接套件82-F和82-BF系列
——【中国电力行业综合商超】海郑实业技术支持
产品描述:3M Scotchcast™ 柔韧的电力电缆连接套件是一系列的内联和分支接头,用在非铠装便携式的电力电缆和电线。它们的设计可以被用在电压高达5kv的单芯和多芯电缆以及电线上。连接点可容纳单芯电缆,尺寸高达120平方毫米的内联拨节和50平方毫米的分支拨节。多导体上浆是基于一个电缆直径范围,高达30mm的内联拨节和21mm的分支拨节。该连接套件是以Scotchcast 2131化合物(材料)的韧性,柔韧性,防潮密封和阻燃性为基础的,它们是由矿业安全健康管理所认证分配的***性连接套件(P-142-5MSHA)。完整的连接套件被用于露天,直埋或淹没的位置。
套件组成部分:每个套件包含足够的下列材料用来修复接头或电缆(套件不包含连接器)。
------ 一体式可移动模具
-----Unipak袋装 Scotchcast 2131化合物
------Scotchcast™胶带用于密封模具末端
-----砂布(目数80J 细沙)
-----全面的说明指出了安装技术,如何正确的连接非铠装便携式电力电缆和电线
共同特点:-----工厂质量长期结合点,MSHA(矿业安全和健康管理)认可等同于商店或工厂硫化。
------柔韧的化合物(材料)使与电缆连接点弯曲,以便安装,操作和旋转
-----Scotchcast 2131化合物(材料)可以自凝,冷硫化不需要火炬,加热的模具,和一段蒸煮时间。
------Scotchcast 2131化合物(材料)可粘合普通的护套材料,氯丁橡胶,
氯磺化聚乙烯,聚氯乙烯,丁腈橡胶/聚氯乙烯, EPR,聚氨酯和2013本身。
------Scotchcast 2131化合物(材料)可形成一个耐磨阻燃的连接点和修复效果。
------光滑的锥形联合轮廓可以消除电缆悬挂力和连接点的端吊力。
应用:为了连接或加护套于非铠装便携式电力电缆和便携式电线。
-----内联单芯电缆的额定电压5kv
-----分单芯电缆的额定电压1000v
-----内联和分多芯电缆的额定电压1000v
-----矿用便携式电缆额定功率600/2000v(P-145-5 MSHA)
-----与压缩内联连接器和压缩“C”支线连接器一起使用
-----室内外的应用:露天,直埋,浸没和电缆卷盘
-----护套修复
典型的数据,物理性能和电力性能
3M Scotchcast™ 柔韧的电力电缆连接套件82-F和82-BF系列可用在无铠装电力电缆,造作额定温度90°C,温度可达130°C以下。该系列的套件可使单芯内联点的额定电压达到5kv,多芯和分节点额定电压为1000v。由矿用安全与健康管理为该套件分配认证为P-142-5 MSHA。
接头选择表
型号 | 电缆外径范围英寸(毫米) |
连接器型号 | 线芯数量 | 连接点***外径 英寸(mm) | 额定电压 (***值) | 导线尺寸范围 (AWG) |
82-F1 |
0.25-0.80 (6-20) |
压缩内联型 | 1 | 0.62 (16) 连接器 | 5000 | 6-1/0 |
多元 | 0.90(23) 连接器线束 |
1000 |
...... | |||
82-F2 |
0.80-1.20 (20-30) |
压缩内联型 | 1 | 0.82(21) 连接器 | 5000 | 2/0--4/0 |
多元 | 1.30(33) 连接器线束 |
1000 | ....... | |||
82-BF1 | 0.25-0.80 (6-20) | 压缩“C”分叉型 | 1 | --- | 1000 | 直达1/0 |
多元 | --- | 1000 | ....... |
矿用便携式电缆额定值 600/2000v
多芯电缆的外径选择要在范围之内
典型的尺寸
套件编号 | 尺寸 英寸(mm) | |||
L | D | H | W | |
82-F1 | 8.0(203) | 1.1(29) | ---- | ----- |
82-F2 | 11.5(292) | 1.6(40) | ----- | ----- |
82-BF1 | 8.3(211) | ----- | 2.2(56) | 1.1(28) |
“L”基于未修剪模具的长度,修剪模具的端部要配合电缆外径,相应地减小尺寸。
典型的物理性能和电力性能
测试方法 | 特殊值 |
颜色 | 黑色 |
硬度(ASTM D2240) 邵氏A
| 80 |
拉伸强度(ASTM D412) | 845 psi (1.32 g/cm³) |
延伸率 (ASTM D412) | 250% |
玻璃化转变温度 | -80°C |
***放热 (3M测试方法,样品100g) | 62°C ( 144 ℉) |
吸湿性 (获得重量,168hrs@100°C) | 3% |
粘附力(3M 测试方法,玻璃试验) 护套材料: 氯丁橡胶 氯磺化聚乙烯橡胶 丁腈橡胶/PVC PVC EPR 氨基甲酸乙酯(本身) 金属: 钢 铝 铜 |
45psi(0.31MPa) 45psi(0.31MPa) 40psi(0.28MPa) 40psi(0.28MPa) 10psi(0.07MPa) 45psi(0.31MPa)
35psi(0.24MPa) 35psi(0.24MPa) 35psi(0.24MPa)
|
物理性能 | |
介电强度(ASTM D149) | 350V/mi |
介电常数(ASTM D150) (60Hz)23°C ( 73 ℉) 60°C ( 140 ℉) 90°C ( 194 ℉) |
3.8% 4.9% 7.5% |
固化时间
为了测试固化,要检查中联模具填充喷嘴里的化合物的黏性。当它不再发粘时,连接或修复被认为可以准备脱模,这代表着化合物的固化大约完成了50%。在完全固化后,***的张力和连接力才能达到。
周围环境温度 典型的最短时间
脱模 固化
21°C(70℉) 1-2hrs 16-24hrs